Posts by secure_admin

What Drywall Finish is Best for Your Home?

»Posted by on Apr 29, 2020 in Drywall | 0 comments

There are a lot of things you have to think about whenever you schedule a new drywall installation. One of these things is the drywall finish. There are a couple of options to choose from when it comes to drywall finishes. Drywall textures applied by professional drywall contractors can improve the interior design of your home while hiding flaws on the walls and ceilings of your house.  

So, before you proceed with your drywall installation project, here are a couple of drywall finish you should think about: 

Swirl 

Usually, the swirl drywall finish is used on ceilings. However, you can also utilize it on your walls. This texture is made from an arrangement of stacked partial circles. It is a difficult style that needs the skills of an expert drywall contractor. 

Skip Trowel 

A drywall contractor produces a skip trowel texture by applying a thin layer of drywall mud. After that, the professional will drag a trowel using an arching motion. A couple of the mud will be raised. Some of it will stay flat. If you want this finish, you’ve got to keep in mind that heavy pieces of furniture can chip a skip trowel finish. That’s why it is ideal to avoid placing huge furniture near the walls.  

Knockdown 

To produce this type of finish for your drywall, the drywall contractor will allow the huge globules of drywall dry after spraying. Then, he will run a drywall knife along with the droplets.  

This type of drywall finish is quite subtle. Also, it almost has the same appearance as stucco. A lot of homeowners choose this type of drywall finish if they want to hide flaws on your ceilings and walls. 

Orange Peel 

The orange peel finish is the most popular drywall texture. The name comes from the appearance of the texture that looks like the surface of an orange peel. It’s extremely simple to achieve this type of drywall finish. All you have to do is prepare the required tools, a specialized nozzle, and an air compressor. Then, you will have to spray the drywall. After that, you wait for the drywall to dry. Finally, the contractor will prime and paint the ceiling or wall. 

Slap Brush 

A brush method to apply drywall is also known as a slap brush. Also, it is known to be an extremely messy technique. The finish is well-known among homeowners since it covers flaws properly. Slap brush is also called the “stomp brush”, “crow’s feet”, “panda paws”, and “tiger’s skin”. 

If you cannot choose what drywall finish to apply to the ceilings and walls of your house, you can always ask a professional drywall contractor for help. These professionals have already applied a lot of finishes. Thus, they will have all the knowledge required to choose the right finish for your home. In addition to that, they also have the tools and skills needed to apply the finish properly without affecting the other areas of your home. You might have a hard time achieving a perfect finish if you do it yourself. 

read more

What Measures to Take to Remove a Popcorn Ceiling

»Posted by on Mar 2, 2020 in Drywall | 0 comments

In the past, a ceiling with texture popcorn patterns was popular when oak cabinets were used to be one of the trends and microwave ovens have their kitchen stands. However, similar to microwaves and cabinets, trends and design concepts have dramatically evolved over several years. Hence, if you happen to be annoyed with your popcorn ceilings, your tastes have possibly changed together with everybody else’s. Luckily, you can remove a popcorn ceiling using two possible options, which are both cost-efficient and effective. The following are four basic steps to get rid of the popcorn ceiling: 

Materials you will need: 

  • Hot Water and Spray Bottle  
  • Sanding Block or Sheet 
  • Painting Tape 
  • Liquid Fabric Softener 
  • Lightweight Plastic Sheeting 
  • Ladder 
  • Joint Compound 
  • Drop Cloths (Plastic or canvass) 
  • Chemical Paint Remover (Optional) 
  • Ceiling Primer and Paint 
  • 10” Drywall Knife  

1st Step: Prepare your room 

Set up your working place. Put aside the valuable things you have that could block your way, like décor and furniture. Then, lay down your canvases and floor tarps to secure your flooring. End the preparation by fastening your lightweight plastic sheeting all around the walls to shield them from damage and dirt.  

2nd Step: Chemicals or water 

Determining whether your ceiling is painted or not will be your next step. Water won’t soak up well into them once they are painted. This will make the process of scraping messier and more challenging. In this case, you can do well if you will utilize a chemical paint remover instead of using water.  

When your ceilings are not coated, mix 1 tbsp. of liquid fabric softener and 4 cups of hot water in a spray bottle. One of the benefits of fabric softener is that it could aid in minimizing the evaporation rate, which will keep your ceilings soaked as you work. Then, utilize a ladder so that you can reach the ceiling area and spray the surface generously with your home-made solution. Leave it for 10 min. to enable the water to seep in, and then spray it with the solution once again.  

3RD Step: Scrape it 

Once the drywall material is already saturated, that would be the perfect time to begin scraping off all of them. Remember that this step could be messy, hence, just put your worries aside until your cleaning session begins. Make sure that you lightly grasp your drywall knife do that you won’t damage the ceiling.  

4th Step: Pain & prime 

Make sure to sweep up the entire dirt and debris that your ceiling has before you start priming and painting your newly-scraped one. At this point, you can fill any dents or holes using joint compound. When it dries, sand the surface flat.  Once your ceilings are already set up, you could start priming and painting them depending on your preference.  

If you think that this project is not for you to handle, it is best if you seek professional help from the experts. At times, anything could lead to an even more serious problem once it is not properly installed or fixed. If you also want some assistance for the installation of your drywall or drywall repair. Our professional drywall contractors will be pleased to help you with any projects. You can also contact us for a free consultation and check out our other services. 

 

read more

What Measures to Take to Remove a Popcorn Ceiling

»Posted by on Oct 16, 2019 in Drywall Repair | 0 comments

In the past, a ceiling with texture popcorn patterns was popular when oak cabinets were used to be one of the trends and microwave ovens have their kitchen stands. However, similar to microwaves and cabinets, trends and design concepts have dramatically evolved over several years. Hence, if you happen to be annoyed with your popcorn ceilings, your tastes have possibly changed together with everybody else’s. Luckily, you can remove a popcorn ceiling using two possible options, which are both cost-efficient and effective. The following are four basic steps to get rid of the popcorn ceiling: 

Materials you will need: 

  • Hot Water and Spray Bottle  
  • Sanding Block or Sheet 
  • Painting Tape 
  • Liquid Fabric Softener 
  • Lightweight Plastic Sheeting 
  • Ladder 
  • Joint Compound 
  • Drop Cloths (Plastic or canvass) 
  • Chemical Paint Remover (Optional) 
  • Ceiling Primer and Paint 
  • 10” Drywall Knife  

1st Step: Prepare your room 

Set up your working place. Put aside the valuable things you have that could block your way, like décor and furniture. Then, lay down your canvases and floor tarps to secure your flooring. End the preparation by fastening your lightweight plastic sheeting all around the walls to shield them from damage and dirt.  

2nd Step: Chemicals or water 

Determining whether your ceiling is painted or not will be your next step. Water won’t soak up well into them once they are painted. This will make the process of scraping messier and more challenging. In this case, you can do well if you will utilize a chemical paint remover instead of using water.  

When your ceilings are not coated, mix 1 tbsp. of liquid fabric softener and 4 cups of hot water in a spray bottle. One of the benefits of fabric softener is that it could aid in minimizing the evaporation rate, which will keep your ceilings soaked as you work. Then, utilize a ladder so that you can reach the ceiling area and spray the surface generously with your home-made solution. Leave it for 10 min. to enable the water to seep in, and then spray it with the solution once again.  

3RD Step: Scrape it 

Once the drywall material is already saturated, that would be the perfect time to begin scraping off all of them. Remember that this step could be messy, hence, just put your worries aside until your cleaning session begins. Make sure that you lightly grasp your drywall knife do that you won’t damage the ceiling.  

4th Step: Pain & prime 

Make sure to sweep up the entire dirt and debris that your ceiling has before you start priming and painting your newly-scraped one. At this point, you can fill any dents or holes using joint compound. When it dries, sand the surface flat.  Once your ceilings are already set up, you could start priming and painting them depending on your preference.  

If you think that this project is not for you to handle, it is best if you seek professional help from the experts. At times, anything could lead to an even more serious problem once it is not properly installed or fixed. If you also want some assistance for the installation of your drywall or drywall repair Reno, Our professional drywall contractors Reno will be pleased to help you with any projects. You can also contact us for a free consultation and check out our other services by checking out this link https://www.renodrywallrepair.com/. 

read more

Signs of a Faulty Washing Machine

»Posted by on Oct 7, 2019 in Uncategorized | 0 comments

Almost every homeowner doesn’t know a thing or two about repairs. This is particularly true when it comes to different appliances. Because of this, there is a high chance that most of them don’t know whenever their washing machine requires a complete replacement or a simple Charlotte washing machine repair 

 

Here are several signs to look for to know if you’ve got a faulty washing machine: 

Too much Noise 

Whenever you use your washing machine and you hear too much noise, it may be simply unbalanced. This is usually a simple repair. Thus, you do not have to contact a professional repairman.  

However, even though it is only a minor issue, you should not just neglect it. Excessive noise is still a sign that something’s wrong with your unit. If you ignore this, it will eventually lead to a much bigger issue. That’s why you should take action immediately.  

Too Much Leaking 

Typically, the most obvious sign that your unit has an issue is if it leaks a lot. This issue is usually a result of a wobbly or overflowing connection.  

If this is the case, the issue might be with your water hose. You can find the water hose in the back of your washer. Usually, due to years of wear and tear, this component will come loose.  

You’ve got an Older Top Load Washer 

The cost of repairs can be extremely costly compared to its counterpart if you’ve got a top-loading washer. This is because the components required for top-loading units are just more costly compared to front-loading units.  

So, if you have an old top load washer that needs repair, it might be best to just buy a new model. Frontloading washers are great since they do not utilize as much water as the top-loading units. Instead of concentrating on the price of a new washer, you should concentrate on the total efficiency of the unit. This will help you save a lot of money in the long run. 

Your Unit is More than 8 Years Old 

While the latest models can last up to 10 years, it is typically ideal for you to start searching for a new one when you’ve got yours for more than 8 years. If you continue to keep your old washing machine, you should expect repairs to be more expensive than before. In addition to that, you might have to repair it much more often.  

On the other hand, newer models of washers can save you a lot of money in the long run because you will have lower energy bills. So, if you always have to do laundry, it’s best to buy a new one. 

Water Does Not Fill the Drum 

There are several issues to consider if the drum of your unit is not filling up. This includes an issue with your cold and hot water faucets, twist in the hose, or delayed cycle selection. However, if you can’t find the issue, then you might have to contact a professional.  

read more

Benefits of Hiring a Junk Removal Service Provider

»Posted by on Sep 2, 2019 in Junk Removal | 0 comments

Many people are actually looking for a lot of ways in order to effectively spring clean as well as get their offices and homes in order. One task related to this is the removal of junk. Even though it may seem like a great idea for you to handle this task alone, the truth is that it is better to hire a professional and reputable junk removal team in order to help you out. 

When you try to organize and remove junk yourself, you will soon realize that it is a truly time consuming and costly task, not to mention it can be very dangerous. Let us face it, there are many more important things that you can do than to spend too much time in removing junk, in which you can have it tackled through hiring a professional service provider. Through leaving this kind of heavy work to the experts, you can then be able to focus more on important tasks and the professionals can organize, remove and dispose of all the junks in a proper, safe, and timely manner. Below, you will be able to learn some advantages of hiring professional junk removal services in your area. 

Saves You Money and Time 

A lot of individuals assume falsely that through hauling, removing and getting rid of junk and other waste themselves, they can be able to save a lot of money. However, in a lot of cases, this can’t be true. The truth is that you’ll possibly end up spending more money on truck rental, gas, and may also have to pay some people – like your close friends or relatives – to help you in moving or disposing of your junks. Aside from that, if you own a business and you ask your employees to have the junk in your commercial property organized, moved, or disposed of, then you will have to pay their overtime as well as risk injury liability. 

Thus, in order to save yourself from this kind of hassle, and to save more money to get this job done, experts highly suggest that you consider hiring a professional and reputable junk removal service provider in your area. With the help of a professional junk removal company, all your junks will be moved in no time and at a safe and proper manner. Now, you will then have more time that you can spend in other important things like to clean the house or in your business, to be more productive throughout the day.  

Provides Safety and Health 

Cleaning your warehouse, attic, unused offices and basement can potentially affect other activities as well as take many days or weeks in order to get done. As a matter of fact, lifting heavy things yourself can only result in abrasions, cuts, injuries or even worse. While it may sound like an easy task for some, the truth is that it’s really helpful and wise to contact a professional junk removal company to do the job for you. A professional haul away junk service provider will also make sure that the entire job will be done safely and swiftly. 

read more